2 Tools in one deal : Angle Grinder & Impact Wrench
20-Volt Batteries 5.0Ah 4Amp Charger
TStakTool Case included For Angle Grinder
Buy 2x 18V/20V Max Get Extra 1x 2.0ah Battery,
Compatible w/ All (200+) DEWALT 18V/20Volt MAX Batteries & Chargers

DeWALT 20V Max DCG405 Brushless 100mm Slide Angle Grinder
Features:
- Brushless motor of the angle grinder requires no brush changes.
- DEWALT grinder's brake stops wheel in 2 seconds or less on average.
- Kickback Brake engages when a pinch, stall, or bind-up event is sensed and the electronic brake engages with maximum
force to quickly stop the wheel, reduce the movement of the metal grinder and shut the grinder off.
- Power Loss Reset prevents accidental restarts following a power disruption when the tool is left in the "on" position.

Specifications:
Voltage : 18V (20V Max)
- Battery Capacity : 5.0 Ah
- Battery : 2
- Charger : DCB115
- Disc Diameter : 100mm ( 4" )
- Spindle Thread : M10
- Switch Type : Slider
- No Load Speed : 9000 rpm
- Soft Start : Yes
- E-clutch : Yes
- E-brake : Yes
- Weight : 2.9 Kg ( With Battery )

DCF911N Brushless 1/2"Dr. Impact Wrench
~ Strong Performance : Up to 250 ft-lbs of max tightening torque and 400 ft-lbs of max breakaway torque.
~ Access Hard To Reach Workspaces with its compact size.
~Quickly Change Sockets : Hog ring anvil for rapid, secure socket changes.
~Brighten Dark Word Areas with on-board LED ring.

Specification
Battery Voltage : 18V / 20V Max
No. Load Speed : 0 - 2,850 Rpm
Impact Rate : 0 - 3,250 Bpm
Max. Tightening Torque : 338Nm
Max. Breakaway Torque : 542Nm
Tool Holder : 12.7mm
Weight Excl. Battery : 1.0 Kg
Standard Packing : Solo Unit Without Battery, Charger and case

DCF809N Brushless Impact Driver (Solo)
- Super compact at only 130mm in length, allowing you to get into even smaller spaces than most other impact drivers
- Ultimate portability at less than 1kg (excluding battery weight) with less strain and fatigue on the user
- Up to 190Nm of max. torque gets the tough applications done
- Efficient brushless motor delivers high performance, extends tool life and allows for a much shorter tool design
- Features the 'Drop and Load' bit holder for one-handed operation

SPECIFICATION
Voltage: 18v / 20V Max
Max Torque (Nm): 190
Brake Type: Electric
LED Job Light: Yes / Triple
Battery Compatibility: 18v/20V Max Lithium-Ion (XR). Battery sold separately
Battery Capacity Indicator: No
Rotation: Forward / Reverse
Variable Speed Control Trigger: Yes
No Load Speed (RPM): 0-2800
Standard Bolt Capacity: M4-M12
Max. Impacts Per Min (IPM): 0-3200
Driving Shank: 1/4" Hex
Overall Length (mm): 130
Net Weight (Kg) with 1.5/2Ah Batt: 1.3
Net Weight (Kg) with 3/4/5Ah Batt: 1.5
Brushless Motor: Yes

Warranty Info:
Machine/Tool : 3 Years Limited Manufacturer Warranty
Battery & Charger : 12 Months Limited Manufacturer Warranty